We strive to provide the most innovative and code compliant passive fire protection products available in the Canadian MarketPlace. IFTI products offer industry-leading solutions to protect building sand occupants from the spread of fire, smoke, and gases over substrates, such as, wood, gypsum, fabrics, and cables.
DC 315 is applied over a manufacturer’s SPF and tested to the criteria of NFPA 286, UL 1715 or ISO-CAN/ULC 9705 for duration of 15-20 minutes by an accredited fire testing facility. DC 315 has also been tested as an
PRODUCT PAGE
IFTI DC360 is a high- performance low VOC, water based, thin film intumescent fire retardant and fire-resistant coating. DC360 has been tested to provide fire ratings meeting IBC/IRC Building Codes for fire resistance and meets ASTME84 and UL723 Flame Spread
PRODUCT PAGE
Metacaulk Firestop Systems are products designed to prevent the spread of fire, smoke, and hot gases through penetrations in fire-rated walls, floors, and ceilings. These systems are particularly important in commercial and industrial buildings, where maintaining the integrity of fire-rated
PRODUCT PAGEActivated with fire exposure, Metacaulk MC 150+ is a general fire-rated sealant for construction joints and through penetrations. Prevents spread of flames/smoke/hot gases/water. All systems rated for up to 4 hours as per ASTM E814 (UL1479) & ASTM E1966
PRODUCT PAGE
Metacaulk 1000 is a 1-component, general fire-rated sealant/smoke seal for construction joints & through-penetrations. Cures to elastomeric seal suited to dynamic motion. Stops flames/smoke/hot gas/water moving through joints & through penetrations. Features Protected in wet & dry stages against mold
PRODUCT PAGE
All grades of Metacaulk 1200 are single-component, general-use fire-rated sealant for construction joints. Cures to elastomeric membrane seal suitable for dynamic movement areas. Prevents spread of flames/smoke/hot gas/water through joint openings. Features Minimum 3 Year Shelf Life and Protected in
PRODUCT PAGE
Smoke and Acoustic Sealant is high-grade acrylic latex sealant that permanently seals penetrations, membrane openings, & static/dynamic joints in smoke & sound-rated assemblies. Tested to ASTM E84, ASTM E90, ASTM E1399, ASTM C834. Features Tested for air leakage in accordance
PRODUCT PAGE
Metacaulk 835+ is a 1-component, fire-rated elastomeric silicone sealant for through penetration firestops. Prevents flames/smoke/gas/water spreading through penetration openings. Silicone based - use in systems where dynamic movement is expected. Features STC rating 55 as well as FBC System Compatible-
PRODUCT PAGE
Metacaulk 350i is a 1-component, general purpose fire-rated sealant/smoke seal for construction joints & around penetrations in fire rated walls/floors. Prevents flames/smoke/hot gases/water spreading through joint openings & through penetrations. Features Highly intumescent and Water Based, non-sag caulking grade sealant
PRODUCT PAGE
Metacaulk Industrial Cable Coating is a ready-to-use, heavy duty spray coating which is ablative & made to impede vertical/horizontal fire propagation along grouped/single comm. or power cables. Made for industrial/utility applications. Features Factory Mutual (FM) approved- our formulation has been
PRODUCT PAGE
Features Prevents the spread of flames, smoke, hot gases and water through joint openings Weather/chemical resistant Non-sag, Flexible Cure, spray grade Forms a water/rain resistant seal after 1 hour Application temperature -20°F to 120°F, excellent freeze-thaw https://rectorseal.com/metacaulk-835-spray-5-gal-fast-cure-silicone/?queryID=7073ea837c9dae9522d1d8f1145000db&objectID=1021&indexName=prod_us_default_products#group.application.tab
PRODUCT PAGE
Metacaulk Pipe Collars are prefabricated for open/closed through-penetration firestop systems with 11/2-6" (38 - 152 mm) plastic pipe. Easy lock mechanism assures easy install. Collar design greatly cuts time/expense compared to competitors' collars. Features Economical and Easy Installation saves on
PRODUCT PAGE
Provides through floor penetration firestop protection for both plastic and metal pipes and all types of cabling Features Integral intumescent firestop UL classified systems up to 3 hrs eliminates drilling of concrete reduces labor time tested in accordance with ASTM
PRODUCT PAGE
Metacaulk Intumescent Sleeve is a firestop seal for several types of plastic pipe & hard non-metal conduit installations. Ideal for flammable pipes penetrating the uneven concrete fluted deck assembly. No need to firestop both penetration sides. Features Tested for PVC,
PRODUCT PAGE
A flexible firestop material used in concrete/masonry control floor & wall joints up to 2" (51 mm) wide. Forms a strong char preventing passage of flame, smoke, & hot gases between control joints. Can use with plastic pipe penetrations. Features
PRODUCT PAGE
Metacaulk Wrap Strip is a highly intumescent firestop material strip mainly for plastic & insulated pipe applications. When exposed to fire, it expands & forms a very hard char to seal the penetration stopping the passage of flames & hot
PRODUCT PAGE
Metacaulk Putty is a moldable non-curing 1-component fire-rated material for through penetration firestop systems. Intumesces when exposed to fire, forming an insulating char. Prevents spread of flames/smoke/gas/water through penetrations. Features For interior use and has No Volatile Solvents- useful when
PRODUCT PAGE
Metacaulk Fire Rated Mortar is a rapid-hardening gypsum/cement compound with the best combination of workability, strength & fire resistance. When mixed with clean water to a suitable consistency it forms a rigid, gas tight, fire-resistant seal. Features Systems rated for
PRODUCT PAGE
Metacaulk Composite Sheet is hard fire-resistive panel for sealing penetrations/restoring fire rating to floors/ceilings/walls with penetrating openings. Intumescent material bonded to steel sheet that chars/slows heat transfer when exposed to fire. Features Intumesces (expands with heat) to form a refractory
PRODUCT PAGE
Firestop Caulk INSS1440 Fire Barrier Caulk is a single component water-based acrylic intumescent firestop sealant caulk. INSS1440 Listed designs use less product and offer exceptional performance, making it more cost-effective than other traditional firestop caulkings. The product’s fast expansion technology
PRODUCT PAGE
INSS1186 Elastomeric FireCaulk is a water-based acrylic elastomeric fire-rated caulk that offers excellent fire protection and flexibility, even after full curing. Characteristics Density: 1.5±0.1 g/cm³ Solid Content (by weight): 75% pH value: 3-7 Dry to Touch: 30 minutes Curing
PRODUCT PAGE
Firestop Caulk INSS1440 Fire Barrier Caulk is a single component water-based acrylic intumescent firestop sealant caulk. INSS1440 Listed designs use less product and offer exceptional performance, making it more cost effective than other traditional firestop caulkings. The product’s fast expansion technology
PRODUCT PAGE
INSS0285 Smoke and Acoustic Sealant is a high performance acrylic based sealant for sealing construction joints and through penetrations in non fire-rated assemblies. INSS0285 offers a reduction in the transmission of sound through wall openings, stops the passage of smoke
PRODUCT PAGE
US150 Fire Barrier Foam is a two-component fire-rated foam, consisting of separate A and B liquid components which, when mixed, forms a flexible medium-density fire retardant foam. US150 Fire Barrier Foam is designed to seal large openings containing multiple penetrations
PRODUCT PAGE
FM011 Moldable Firestop Putty is an industry-leading, one-part, flexible intumescent putty ready-to-use for wall or floor openings containing cable trays, cable bundles, plastic pipes and/or conduits providing up to a 3-hour fire-resistance rating. Characteristics Specific Density: Approx. 1.25 – 1.35
PRODUCT PAGE
US150 Firestop Brick is a medium density, flexible polyurethane foam designed to firestop large openings containing various penetrants. Once exposed to fire US150 is highly intumescent, this expansion provides a tight seal against the passage of flame, smoke and toxic
PRODUCT PAGE
FP-02 Firestop Sheet is an industry leading Firestop Sheet fabricated by bonding proprietary intumescent materials to a metal sheet. FP-02 securely blocks flame and is designed to seal large penetrations through fire-rated walls and floors. It is also used for shielding
PRODUCT PAGE
FP-04+ Firestop Sheet is an industry leading Firestop Sheet fabricated by bonding proprietary intumescent materials to a metal sheet. FP-04+ securely blocks flame and is designed to seal large penetrations through fire-rated walls and floors. It is also used for shielding
PRODUCT PAGE
Spray to Protect DC 68: is a new water based fire proofing spray that is a Non Toxic, Hypoallergenic, colorless and odorless formula that can be used on virtually any water absorbent fabric or material.Three components are necessary for fire:
PRODUCT PAGE
DC6150 is non-halogenated, asbestos-free, non-toxic, flexible, ablative or intumescent, fire retardant cable coatings designed to prevent ignition and fire propagation along plastic jacketed electrical and data cables. Test Standards, Codes Compliance FM Approval Class – 3971 for Single or Grouped
PRODUCT PAGE